Condition, apart from the usual light marks to some areas from use this machine is in lovely order. This machine has been bench prepared by an experience engineer. A process which takes about three days to produce a machine to this standard.
The machine will have been fully serviced, checked renewing parts so it will be ready to perform front line. It has also been fitted with a pair of new certified safety valves for your peace of mind and the machine will also be supplied with a PSSR test certificate, which will be performed as part of our predelivery supply routine. Yes it has been used but we.
To make the machine both perform and look as close to new as we can. The best bit is that this is at a fraction of the price of new.
Please see extensive photos where you can the standard of preparation. Supplied with a backflushing plate to perform a simple cleaning action, and two double shot handles. We have also included a single basket and spout in case single shots are required. The machine operates on a 240v 32amp single phase supply (6000W) but can be downrated to run on a 20amp supply if required or even 13 amps if needed, so very flexible... Yes that does mean it will be slower to warm up but once up to pressure, and as long as you.Take lots of water from it for tea, it will perform very well. We have supplied many of these into mobile installations as the combination of durability that these environments pose, a large capacious 12 litre boiler which is a huge. For lots of drinks and that option for only a 13 amp connection, all prove so very useful. Sometimes power supplies can be limited so this option is vital and should matters change, this is completely reversible. You are also welcome to collect or if you wish, we can wrap and palletise in preparation for your courier without cost. We aim to be frank in assessment.
All items must be installed by a qualified person i. Engineer, electrician, plumber or gas fitter and tested by them prior to use. If service and remedial work is required it must be performed by a qualified individual or firm. The two group machine is the most popular model as it isn't too large to take up all your counter space.Armed with a 12 litre boiler employing a 6000 watt element, this machine can cope with the busiest of environments. This serious machine will produce coffee drinks as fast as the barista can manage. The large tank necessitates the pump being separate to the machine, there simply isn't the space inside the frame to accommodate it.
However, this easily lives beside the required water filter occupying about the space of a shoebox and makes it easier for servicing requirements. With a 12 litre tank there is plenty of water for Americanos and copious steam pressure, essential for the production of quality coffee.
The steam jet valves feature a half turn or full operation for fast and controlled milk foaming coupled with large 500ml heat exchangers allows for constant coffee temperature, vital in busy environments. Not only a centrepiece of a machine to grace your business, but a machine that can produce four espresso shots at a time, or 240 per hour - the barista will have to work very hard to attempt to keep up with the machine!
Heavy build quality, these machines are the business and will do the business. 2 Group Specifications & Service Requirements. 32 Amp Single Phase (Can Be Downrated to 13 amp). 40mm Gravity Drain with U trap and Upstand. LCM Reference: M2 - 1.
The item "CMA Astoria 2 Group Marisa Coffee Espresso Machine Gleaming Stainless Steel" is in sale since Tuesday, July 20, 2021. This item is in the category "Business, Office & Industrial\Restaurant & Food Service\Bar & Beverage Equipment\Commercial Coffee, Cocoa & Tea Equipment\Coffee & Espresso Machines\Cappuccino & Espresso Machines". The seller is "lovecoffeemachines" and is located in Bristol. This item can be shipped to United Kingdom.